LESSON SUMMARY: This lesson is designed to assist the user in adjusting the contrast on a SuperParts™ Timing Mechanism.

Special Tools Needed: None

⚠ CAUTION: THIS LESSON MAY INCLUDE INSTRUCTIONS TO TEST HAZARDOUS VOLTAGES (120V-240V) THAT CAN CAUSE SERIOUS INJURY OR DEATH. IT IS RECOMMENDED THAT A LICENSED ELECTRICIAN BE CONTRACTED TO PERFORM SUCH TESTS.

🛑 STOP: ALWAYS TURN OFF THE POWER TO THE SATELLITE BEFORE REMOVING OR INSTALLING COMPONENTS.

---

*This lesson applies to SuperParts™ Timing Mechanisms for Network LTC® Version 1, Network LTC® Version 2, Network LTC® Plus, VT3/VT4, Network 8000, and Network VP®.

---

To adjust the contrast on the display for a SuperParts™ Timing Mechanism, proceed with the following steps:

With the Timing Mechanism on the Home screen, press the “Satellite Settings” or “Satellite Information” button in the lower right hand corner of the unit.

Press the down navigational arrow until the LCD has a blinking cursor over “Display Adj: _ _ _ _ _”

Turn the knob clockwise to dim the display.

Turn the knob counterclockwise to brighten the display.

Press the Home button to save the settings.

---

Lesson tags: hunter, toro, rain bird, rainbird, buckner, contrast, display, timing mechanism, dark screen, repair, exchange, replacement, boardtronics

©2022 BoardTronics, Inc. All Rights Reserved. (Read Copyright Statement Here)