LESSON SUMMARY: This lesson is designed to assist the user in setting their satellite address on a SuperParts™ Timing Mechanism for PAR 16/24 so the Timing Mechanism can communicate with the central computer. If you are not operating a central, you will not need to set a satellite address.
Special Tools Needed: None
⚠ CAUTION: THIS LESSON MAY INCLUDE INSTRUCTIONS TO TEST HAZARDOUS VOLTAGES (120V-240V) THAT CAN CAUSE SERIOUS INJURY OR DEATH. IT IS RECOMMENDED THAT A LICENSED ELECTRICIAN BE CONTRACTED TO PERFORM SUCH TESTS.
🛑 STOP: ALWAYS TURN OFF THE POWER TO THE SATELLITE BEFORE REMOVING OR INSTALLING COMPONENTS.
*This lesson applies to the SuperParts™ Timing Mechanism for PAR 16/24.

From the “Clock Status” screen, press the “System Information” button, located in the lower right hand corner of the keypad, three times.

Use the up and down arrows to adjust the Satellite Address (Satellite ID).
When the desired address is set, press “Clock Status.”
Lesson tags: rain bird, rainbird, superparts, par, par 16, par 24, par 16/24 repair, help, troubleshooting, exchange, motherboard, timing mechanism, faceplate, satellite address, boardtronics
©2022 BoardTronics, Inc. All Rights Reserved. (Read Copyright Statement Here)