EOSMAC ISSUE:
pump not turning on

IMPORTANT: Any time you install or remove components, disconnect power to the unit before you begin. "Hot Plugging" components in this manner can cause even further damage to one or more cabinet components.

To power down a Toro E-Series OSMAC system, flip the circuit breaker on the power supply inside the cabinet to the "Off" position.

If the pump in your Toro E-Series OSMAC system is not turning on, test the functionality of the Pump Common first:

Swap the Pump Common with a known operational Pump Common from another satellite location.
If the problem goes away, the original Pump Common must be replaced. Brand new Pump Commons can be purchased HERE.
If the problem persists, the Power Distribution Board must be replaced. Brand new Power Distribution Boards can be purchased HERE.

Need more help?

Ask a BoardTronics Engineer

EOSMAC ISSUE:pump not turning on

Irrigation Question

EOSMAC ISSUE:
pump not turning on