EOSMAC HOW-TO:
installing/removing a switch/surge board

To remove a 16-Station Switch & Surge Board from your Toro E-Series OSMAC cabinet, follow the steps below. To install it, work these steps backwards.

1. Remove the two 8-Station Output Boards attached to the 16-Station Switch & Surge Board (8-Station Output Board removal instructions can be found HERE).
2. Detach the field wire plugs and remove the corner screws from the 16-Station Switch & Surge Board.
3. Gently remove the 16-Station Switch & Surge Board from the cabinet.

Need more help?

Irrigation Question

---

Have an irrigation question? Just ask!
Your question will be forwarded to the Engineering Department and you will receive a prompt response during regular business hours.
Your questions are what keep The Brain™ growing!