LTC 2.0 HOW-TO:
installing/removing a faceplate

IMPORTANT: Any time you install or remove components, disconnect power to the unit before you begin. "Hot Plugging" components in this manner can cause even further damage to one or more cabinet components.

To power down a Toro Network LTC 2.0 system, flip the black circuit breaker on the Power Supply inside the cabinet to the "Off" position.

To remove the Timing Mechanism ("Faceplate") from your Toro Network LTC 2.0 cabinet, follow the steps below. To install it, work these steps backwards.

Gently slide the Timing Mechanism out of its mount in the cabinet.
Before completely pulling the Timing Mechanism away, detatch the three connectors on the bottom of the Timing Mechanism.

Need more help?

Ask a BoardTronics Engineer

LTC 2.0 HOW-TO:installing/removing a faceplate

Irrigation Question

LTC 2.0 HOW-TO:
installing/removing a faceplate