ALL U.S. ONLINE ORDERS: FREE 2-DAY UPS® DELIVERY Order by 5 PM ET for SAME DAY SHIPPING (Mon-Fri)

NEW CUSTOMER?
OPEN AN ACCOUNT!

LTC 1.1 HOW-TO:
reinitializing a faceplate

To power down a Toro Network LTC 1.1 system, flip the black circuit breaker on the Power Supply inside the cabinet to the "Off" position.

To reinitialize the Timing Mechanism ("Faceplate") in your Toro Network LTC 1.1 cabinet, you first need to indentify the version of your Timing Mechanism. v1.0 Timing Mechanisms can run four programs, and v2.5 Timing Mechanisms can run eight programs. The reinitialization process is different depending on which version you have.

NOTE: reinitializating a Timing Mechanism will erase all program information and replace it with default program settings.

    Reinitializing a v1.0 (4-program) Timing Mechanism

  1. Power down the cabinet.
  2. Press and hold the down-arrow, up-arrow, and ENTER buttons.
  3. Power up the cabinet while keeping these buttons held down for at least five seconds after initiating the power up.

    Reinitializing a v2.5 (8-program) Timing Mechanism

  1. Power down the cabinet.
  2. Press and hold the down-arrow button.
  3. Power up the cabinet while keeping this button held down until a second set of rapid beeps are heard.
  4. The Timing Mechanism will go through a self-test at this point, checking the memory, flashing all LEDs, activating all display segments, and sequentially activating all stations. The memory is also cleared during this process—only the time and date remain unchanged.
  5. After the displays stop sequencing, there will be a single number visible. This is simply a code that changes as different buttons are pressed.

Need more help?