ALL U.S. ONLINE ORDERS: FREE 2-DAY UPS® DELIVERY Order by 5 PM ET for SAME DAY SHIPPING (Mon-Fri)

NEW CUSTOMER?
OPEN AN ACCOUNT!

LTC HOW-TO:
using Link Monitor Mode on faceplate

To power down a Toro Network LTC system, flip the black circuit breaker on the Power Supply inside the cabinet to the "Off" position.

NOTE: For Toro Network LTC 1.1 systems, Link Monitor Mode is only available for the 8-program version (v2.5). The 4-program version (v1.0) does not have Link Monitor Mode.

Link Monitor Mode is used for testing/troubleshooting/pinpointing issues within the communication system. Follow the steps below to use Link Monitor Mode on a Toro Network LTC satellite:

  1. Press and hold the right-arrow button for 5 seconds. The display should show a number in each window. These numbers are actually the address being called upon by the central. The left number represents the group number, while the right number represents the satellite number. As the central calls different satellites, these numbers will change automatically.
  2. If two different satellites on the same communication wire path are put into Link Monitor Mode at the same time, the numbers showing should always be the same between the two satellites. If only one shows the numbers changing, then there is a problem with the communication system in or near the satellite that has the display that does not change.
  3. To end Link Monitor Mode, press the STOP button.

Need more help?