IMPORTANT: Any time you install or remove components, disconnect power to the unit before you begin. "Hot Plugging" components in this manner can cause even further damage to one or more cabinet components.
To power down a Toro Network LTC 2.0 system, flip the black circuit breaker on the Power Supply inside the cabinet to the "Off" position.
If the Timing Mechanism ("Faceplate") in your Toro Network LTC 2.0 cabinet appears dead, or is not receiving any power, troubleshoot the issue by checking the power going into the Timing Mechanism from the Distribution Board:
Need more help?
Ask a BoardTronics Engineer