IMPORTANT: Any time you install or remove components, disconnect power to the unit before you begin. "Hot Plugging" components in this manner can cause even further damage to one or more cabinet components.
To power down a Toro Network LTC system, flip the black circuit breaker on the Power Supply inside the cabinet to the "Off" position.
If the buttons on the Timing Mechanism in your Toro Network LTC cabinet are not working, the issue is likely the result of a malfunctioning keypad or malfunctioning buttons on the printed circuit board within the Timing Mechanism. In either case, the Timing Mechanism must be replaced.
Need more help?
Ask a BoardTronics Engineer