ALL U.S. ONLINE ORDERS: FREE 2-DAY UPS® DELIVERY Order by 5 PM ET for SAME DAY SHIPPING (Mon-Fri)

NEW CUSTOMER?
OPEN AN ACCOUNT!

NETWORK 8000 ISSUE: single station not coming on or stuck on

To power down a Network 8000 cabinet, remove one of the two main fuses located towards the bottom inside of the cabinet.


    • Check the 6-pin connector for corrosion on the pins.
    • Check the output contacts on the bottom of the board are free of debris and corrosion.
    • Problem may be related to the faceplate. Check this by swapping the board with a known working one.
Network 8000 TRIAC Board Diagram 3