VT II/MONITOR II HOW-TO: installing/removing a faceplate
IMPORTANT: Any time you install or remove components, disconnect power to the unit before you begin. "Hot Plugging" components in this manner can cause even further damage to one or more cabinet components.
Remove the timing mechanism fuse. The fuse is located on the bottom right side of the timing mechanism. [Picture]
Remove the four cabinet corner screws using a phillips screwdriver.
Remove the timing mechanism by pulling it up from the right side first.
Disconnect the green timing mechanism ground wire from the cabinet.
Disconnect the plug by pressing the ears in and firmly pulling the two sides apart.